Products

LCD2090-SVII


The 20” NEC LCD2090-SVII, a flat-panel monitor bundled with SpectraViewII Colour Calibration Solution and light sheilding hood, delivers a smart investment to your desktop while ensuring accurate, consistent and repeatable colour performance. The colour calibration software, when teamed with a supported colour sensor, allows it to achieve 72% of NTSC and 75% of Adobe RGB coverage.

  • ColorComp compensates for slight variations of white/colour uniformity to create even consistent tones throughout the viewing screen
  • 12-bit look up table creates finer gray gradiation and allows crisp clear images
  • Ambix3 TM technology allows up to 3 computers or other imputs via VGA, DVI-I & DVI-D to be connected to a single monitor and switch between all three of them
  • Real Time Clock has the ability to set schedules for on/off times 24 x 7 and can be set to warm up 30 minutes before use for optimun colour representation
  • OSM lockout allows the ability to lockout all functions including power and limits non users from adjusting pre set adjustments determined by end user
  • Auto Black Level Adjustment allows automatic control of blackness levels which is superior for creating greater ranges of black colours
  • Ultra-Wide Viewing Angles are perfect for multiple observers from many positions
  • Advanced NTAA(No-Touch-Auto-Adjust) input signal is checked every 30 minutes and always when the monitor is connected to a new input device

 


Specifications

Panel Technology S-IPS A-TW Pol (Super IPS with Advanced True Wide Polarizer)
Screen Size [inch/cm] 20.1 / 51.0
Pixel Pitch [mm] 0.255
Viewing Angle [°] 178 horizontal / 178 vertical (typ. at contrast ratio 10:1)
Contrast Ratio (typ.) 700:1
Brightness (typ.) [cd/m²] 280
Response Time (typ.) [ms] 8 (grey-to-grey), 16 (9 white / black; 7 black / white)
Colours [Mio.] 16.77
Horizontal Frequency [kHz] 31.5 - 91.1
Vertical Frequency [Hz] 50 - 85
Optimum Resolution 1600 x 1200 at 60 Hz
Supported Resolutions 1280 x 1024; 1280 x 960; 1200 x 1600; 1152 x 870; 1152 x 864; 1024 x 768; 832 x 624; 800 x 600; 720 x 400; 640 x 480
Connectors Digital: 1 x DVI-D; Digital/ Analog: 1 x DVI-I; Analog: 1 x D-sub 15 pin
Plug & Play VESA DDC/CI; VESA DDC2B; EDID Standard
Adjust Functions Advanced NTAA (Advanced Non-Touch-Auto-Adjustment); Advanced User Menu; Auto Adjust; Black Level; Brightness; Colour Temperature Control; Contrast; Expansion Mode; Fine Adjust (analog); Hotkeys; Intelligent Power Management; Language Select; Monitor Information; OmniColor™: sRGB and 6-axis-colour-control; On-Screen-Manager (OSM) lock-out; Sharpness; User Menu
Safety and Ergonomics CE; TCO 03; TÜV Ergonomics; TÜV GS; C-tick; GEEA/Energy Label; Energy Star; FCC Class B; PCT/Gost; UL/C-UL or CSA; CCC; ISO 13406-2 (pixel failure class II); MPR II/ MPR III; PCBC/B-mark; PSB; RoHS
Power Consumption on Mode [W] 50 (max.)
Power Consumption Power-Saving Mode [W] 1
Power Supply 100-120 V/220-240 V; 0.68 A/0.29 A; internal power supply
Ambient Temperature (operating) [°C] +5 to +35
Ambient Humidity (operating) [%] 30 to 80
VESA Mounting [mm] 100 x 100
ErgoDesign®: Height adjustable Stand [mm] 150
Screen Tilt / Swivel [°] -5 to +30 / -170 to +170
Dimensions (W x H x D) [mm] 439.2 x 415.5 - 565.5 x 247.3 (Landscape mode)
Bezel Width [mm] 14.6 (left and right)
Weight [kg] 9.7
Cable Management yes
Kensington Lock yes
Benefits Adjustable power LED (colour and brightness); Advanced NTAA (Advanced Non-Touch- Auto-Adjustment); AmbiBright; ambix³™; Auto Black Level; Auto Brightness; Auto Contrast; AutoBright; CableComp with Sync Continuity Detection; ColorComp; DDC/CI compatible; Direct Brightness and Contrast; EcoModes; GammaComp (12 bit Look Up Table and 12 bit Gamma Correction); NaViSet® and NaViSet® Administrator compatible; OmniColor™; Overdrive; Quick release Stand and Handle; Rapid Response Technology; RapidMotion; Real Time Clock with Scheduler (Power-On and Power-Off Timer); SpectraView® Profiler Software; TileComp; TileMatrix; TORO™ Design
Audio Functions Option: MultiSync® Soundbar 90
Colour Versions Black Front Bezel, Black Back Cabinet
Shipping Content Monitor; Power Cable; Signal Cable DVI-A - VGA, DVI-D - DVI-D; CD-ROM (User Guides/Manuals); CD-ROM with SpectraView® Profiler Software and manual; Detachable black light protection hood including accessories; SpectraView® Certifier document
Warranty 3 years warranty

 

Technologies

XtraView+

Delivers wide viewing angles of up to 178º horizontally and vertically (up to 89º up, down, left and right) with less color shift and without any glare, reflection or distortion.

Ambix

Allows up to 3 inputs VGA, DVI-I and DVI-D to be connected to a single monitor. Allows for each of the three signals to be displayed with the press of a button.

ColourComp

This electronically improves screen uniformity and compensates for differences in color/grayscale and luminance using newly designed signal processing circuitry.

X-Light Pro

X-LightTM Pro uses a internal backlight sensor to maintain a consistent light output for the useful life of the display as well as correcting for short term fluctuations. This allows the display to maintain consistancy and calibration for use in medical and color critical applications.

AmbiBright

Automatically adjusts the backlight depending on the brightness of ambient lighting conditions. Also allows the monitor to be set to automatically enter a power-saving mode when the ambient lighting falls below a predetermined value (i.e.when office lights are shut off at the end of the day), which can significantly reduce energy expenses.

Rapid Response

Provides for uninterrupted display of full motion video with response times as quick as 4ms. It delivers streaming video without noticeable ghosting or blurring, while achieving as many as 250 frames per second (fps). This remarkably quick motion makes displays better than ever for gaming and video applications such as presentations and streaming web video.

Cable Comp

For analog inputs only. Corrects for input signal distortion caused by long cables and low output levels of video cards.This technology uses a digitized signal delay circuit to automatically compensate for each red, green and blue cable's length and video signal delay, ensuring sharp image reproduction.

ECO Mode

Eco-Mode conserve energy by allowing you to define a setting for the backlight at a 50 or 75% brightness level. Also calculates power saving in Watts Per Hour

Tile Matrix

Allows you to build video walls of various configurations (up to 5 x 5) through the advanced OSD.

Tile Comp

Designed to work in tandem with Tile Matrix on NEC monitors. TileComp automatically adjusts for the width of the monitor bezels to compensate for geometrical distortions. However some data on the screen will be lost in the area of the bezels.

NTAA

No Touch Auto Adjust allows the monitor's image settings to be automatically adjusted to optimal settings upon intial power on.

Spectra View

Featuring state-of-the art calibrator and software, the Spectraview color calibration solution helps deliver accurate, consistent and repeatable color performance. Performs hardware monitor calibration and generates ICC profiles that can be used with graphics software.

sRGB

A recommended default color setting that helps achieve a consistent color environment for PC-based applications. With sRGB, the image colors seen by the user on his/her screen can be reproduced elsewhere, such as printers.

OSD

On Screen Display controls allow users to quickly and easily adjust all elements of their screen image via simple-to-use on screen menus.

Downloads